TORK CRAFT
Recently Viewed Products
Find the right productChoose only the details that matter to you
ANNULAR HOLE CUTTER HSS 45 X 30MM WELD SHANK 19.05MM
R1,171.93 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 45 X 55MM WELD SHANK 19.05MM
R1,559.43 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 46 X 55MM WELD SHANK 19.05MM
R1,632.09 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 48 X 30MM WELD SHANK 19.05MM
R1,412.33 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 48 X 55MM WELD SHANK 19.05MM
R1,802.07 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 50 X 30MM WELD SHANK 19.05MM
R1,537.91 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 50 X 55MM WELD SHANK 19.05MM
R1,990.89 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 55 X 30MM WELD SHANK 19.05MM
R1,681.43 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 55 X 55MM WELD SHANK 19.05MM
R2,254.16 (Incl VAT)One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome.
ANNULAR HOLE CUTTER HSS 58 X 30MM WELD SHANK 19.05MM
R2,010.18 (Incl VAT)Size: 58 mm x 30 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER HSS 58 X 55MM WELD SHANK 19.05MM
R2,281.97 (Incl VAT)Size: 58 mm x 55 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER HSS 60 X 30MM WELD SHANK 19.05MM
R2,005.69 (Incl VAT)Size: 60 mm x 30 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER HSS 60 X 55MM WELD SHANK 19.05MM
R2,601.75 (Incl VAT)Size: 60 mm x 55 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER HSS 64 X 55MM WELD SHANK 19.05MM
R2,948.89 (Incl VAT)Size: 64 mm x 55 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER HSS 65 X 30MM WELD SHANK 19.05MM
R2,327.72 (Incl VAT)Size: 65 mm x 30 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER HSS 65 X 55MM WELD SHANK 19.05MM
R3,012.13 (Incl VAT)Size: 65 mm x 55 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER TCT 12 X 35MM WELD SHANK 19.05MM
R679.93 (Incl VAT)The Tork Craft TCAC012-3 is a tungsten-carbide tipped (TCT) annular cutter with a 12 mm diameter and 35 mm cutting depth, featuring a 19.05 mm Weldon Shank design. This tool is engineered for efficient core drilling through steel, structural sections and other metal fabrication work where precise, clean holes are needed.
ANNULAR HOLE CUTTER TCT 14 X 35MM WELD SHANK 19.05MM
R679.93 (Incl VAT)The Tork Craft TCAC014-3 is a tungsten-carbide tipped (TCT) annular cutter with a 14 mm diameter and 35 mm cutting depth, featuring a 19.05 mm Weldon shank. Engineered for steel fabrication and structural work, this tool delivers fast, clean holes in metal with minimal material waste and exceptional precision.
ANNULAR HOLE CUTTER TCT 16 X 35MM WELD SHANK 19.05MM
R679.93 (Incl VAT)The Tork Craft TCAC016-3 annular cutter features a 16 mm diameter and 35 mm cutting depth, with a 19.05 mm Weldon shank for use in magnetic drills and fabrication rigs. The TCT (tungsten carbide tipped) cutting edges provide excellent durability and precision, allowing fast, clean core-hole drilling in structural steel, fabrication and metalwork.
ANNULAR HOLE CUTTER TCT 16 X 55MM WELD SHANK 19.05MM
R769.63 (Incl VAT)The Tork Craft TCAC016-4 annular cutter features a 16 mm diameter with a 55 mm cutting depth and a 19.05 mm Weldon shank. Built for demanding fabrication work, its tungsten-carbide tipped (TCT) cutting edges ensure fast, clean holes in steel, structural sections or pipe applications where precision and durability matter.
ANNULAR HOLE CUTTER TCT 18 X 35MM WELD SHANK 19.05MM
R679.93 (Incl VAT)Size: 18 mm x 35 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER TCT 18 X 55MM WELD SHANK 19.05MM
R769.63 (Incl VAT)Size: 18 mm x 55 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER TCT 20 X 35MM WELD SHANK 19.05MM
R679.93 (Incl VAT)Size: 20 mm x 35 mm [3/4" Weldon Shank]
ANNULAR HOLE CUTTER TCT 20 X 55MM WELD SHANK 19.05MM
R769.63 (Incl VAT)Size: 20 mm x 55 mm [3/4" Weldon Shank]