ROUTER BIT CHAMFER 1″

Chamfer Router Bit 1″

Cutting Depth:3/8″
Classification:Standard (Yellow)

The Chamfer Router Bit is an indispensable edge-forming tool in woodworking, specifically engineered to cut a precise, flat beveled angle into the sharp, 90-degree corner of a workpiece.

Defined by its straight cutting edge set at an angle—most commonly 45°, but also available in 22.5°, 30°, and other degrees—this bit allows you to create a crisp, clean diagonal face on an edge. It is a highly versatile tool, most frequently used to soften a sharp edge for comfort and visual appeal, or to add a refined, subtle decorative detail to furniture, tabletops, and built-ins.

Beyond simple edge detailing, the chamfer bit is critical for creating perfect, tight-fitting miter joints for multi-sided projects like custom boxes, picture frames, and planters, as the angled cut ensures a seamless corner without complex saw setups.

Most chamfer bits feature a guide bearing at the tip, which rides along the edge of the material to control the depth and width of the cut, ensuring perfectly consistent results with minimal setup.

Application:

• Router bits are for use with router machines only.
• Be sure that at least 3/4 of the shaft length is inserted into the router collet.
• Do not “bottom-out” the bit in the collet. The shank should be 1/8″ from the bottom of the collet.
• Route in two or more passes when large amounts of stock must be removed.
• Carpenters
• Craftsmen
• Hobbyists
• Woodworking
• DIY